Industrial 3D Vision
Thu, 21.06.2018, Chur GR
3D Laserscanning, LiDAR, TOF
3D vision hardware has found its way into countless industrial processes. A single 3D sensor can address the complex problem of dynamic position monitoring of bodies and parts. The rapid evolution of 3D imaging techniques and data processing methods has opened an avenue of applications for 3D vision. This workshop will be the forum for participants from industry and academia to share their experiences and discuss challenges and perspectives of present and future applications.Date
Thursday, 21. June 2018
Time
09:30 till 17:00
Program
09:30 Registration, Welcome Coffee, Sponsoring Swissphotonics NTN
10:15 Talks Session 1
11:45 Showroom industry products, Lab visits, parallel to the lunch
11:45 Lunch, Sponsoring Swissphotonics NTN
13:30 Talks Session 2
14:50 Coffee break
15:30 Workshop Session
16:20 Discussion
17:00 Apéro riche, Sponsoring Swissphotonics NTN
Show Case
Tabletop Exhibition in separate room with max. 10 tables (first come first served) for Swissphotonics Members:
- CEDES Group
- CSEM SA
- ESPROS Photonics AG
- HTW Chur
- KEOPSYS/QUANTEL
- NTB
Conference language
English
Venue
HTW Chur Hochschule für Technik und Wirtschaft
Pulvermühlestrasse 57
7004 Chur
- By public transport
By train to Chur main station
Chur Bus # 2 to Obere Au P+R
Stop: HTW Ringstrasse
Departure at 10, 25, 40, 55
- By car
No parking at the HTW
Use the parking: Obere Au P+R
Map
Fees
15 min Walking or
Chur Bus # 2
Stop: HTW Ringstrasse
Cost
This workshop is free of charge
Contact HTW Chur
Prof. Dr. Udo Birk
Image Processing Lecturer & Researcher
Institute for Photonics and ICT (IPI)
+41 81 286 37 97
Contact Swissphotonics
Dr. Christoph S. Harder
President Swissphotonics NTN
+41 79 219 90 51
14. September 2018, Beni Muller + Iris Bollinger / jp
 Programm (PDF) |
||
| Speakers (PDF) |
| Program | ||
| Dr. Christoph S. Harder; President Swissphotonics NTN, 8832 Wollerau SZ Link | Moderation | |
| Prof. Jürg Kessler; dipl. Ing. ETH, lic. oec. publ., Rector University of Applied Sciences HTW Chur, 7004 Chur GR Link | Welcome from the HTW | Kessler |
| Dr. Udo Birk; Image Processing Lecturer & Researcher, University of Applied Sciences HTW Chur, 7004 Chur GR Link | Introduction to the Workshop | Birk |
| Jacques Cochard; Tematys's partner, Tematys, 75009 Paris, France Link | LiDAR technologies for the Automotive Industry: Technology Benchmark, Challenges and Market Forecast | Cochard |
| Christian Erik Thoeny; CEO Cedes Group, 7302 Landquart GR Link | 3D Sensors for Transportation Systems | Thoeny |
| Dr. Markus Rossi; CIO Heptagon member of the ams group, 8803 Rüschlikon ZH Link | 3D Cameras for Consumer Application | |
| Dr. Julien Boucart; Sr Product Manager, High Volume Components, ii-vi Laser Enterprise GmbH, 8045 Zürich Link | Laser Diodes for Sensing | Boucart |
| Lucio Carrara; CTO and R&D manager at Fastree 3D SA, 1024 Ecublens VD Link | System on Chip LiDAR | Carrara |
| Dieter Kaegi; Senior Product Manager ESPROS Photonics AG, 7320 Sargans SG Link | 3D Facial Scanning | Kaegi |
| Alexandre Pollini; Senior Project Manager at CSEM SA, 2002 Neuchâtel Link | Sensors for LiDAR and TOF | Pollini |
| Dr. phil.-nat. Hannes Merbold; Dipl. Physiker, Lecturer Institut Photonics and ICT IPI, University of Applied Sciences HTW Chur, 7004 Chur GR Link | 3D TOF Imaging in Underwater Settings | Merbold |
| Dr. Philipp Roebrock; Lecturer Departement Applied Future Technologies, Institut Photonics and ICT IPI, University of Applied Sciences HTW Chur, 7004 Chur GR Link | 3D Image Processing | Roebrock |
| Dr. Reto Wyss; Director Software Engineering at Cognex Switzerland GmbH, 1690 Villaz-St-Pierre FR Link | Deep Learning based Image Analysis for Factory Automation | Wyss |
| Dr. Christoph S. Harder; President Swissphotonics NTN, 8832 Wollerau SZ Link | Moderation of the Discussion | |
